Important: Use custom search function to get better results from our thousands of pages

Use " " for compulsory search eg:"electronics seminar" , use -" " for filter something eg: "electronics seminar" -"/tag/" (used for exclude results from tag pages)


Tags: assignment, each, Questions, Oral, Oral Questions on each assignment of MIL,
 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Oral Questions on each assignment of MIL
Post: #1


.pdf  1461003827-FinalExamOralQuestionsonMIL.pdf (Size: 95.88 KB / Downloads: 1)



Assignment No.1 ( Addition of N-Hex Numbers)
Q1. Differentiate the macro and procedure.
Q2. Explain accept_16 and display_16 procedure.
Q3. What is mean by add 30H and Sub 30H
Q4. what is mean by data types ?
Q5. Explain 64 and 32 bit print, read and exit macro
Q6. what is ASCII value of 0, A and a ?
Q7. what are the conditional instructions ?
Q8. what is mean by XOR operation ?
Q9. when carry is generated ?
Q10. How the addition result is stored in ansl and ansh
Q11. When carry is generated then what happens ?
Q12. What is mean by byte, word, dword, qword ?
Q13. One dword means how many bits ? And how many digits ?
Q14. What is mean by DIV operation ?
Q15. What is mean by HEX to ASCII conversion and ASCII to HEX conversion ?
Q16. Why we take RBX = 16 in display procedure ?
Q17. What is mean by SUB30, SUB37 and SUB57 ?
Assignment No.2
(Non-overlapped / Overlapped Block transper with/without instruction)
2a : Non-Overlapped Block transper without string instruction
Q1. What is the output of Source block and Destination block for Before block transfer and After
block transfer ?
Q2. What is the difference between Non-overlapped and Overlapped block transfer without string
instruction (explain with block diagrams)
Q3. what are the values in rsi , before block transfer in source block and destination block
Q4. How the elements are transfer in Non-overlapped block tranfer without string instruction ?
Q5. Explain BT_NO procedure .
Q7. Explain disp_block procedure .
Q8. For transfering the elements in destination block , RSI and RDI points to which location of
source block and destination block ?
Q9. what is mean by with string instruction and without string instruction ?
2b : Non-Overlapped Block transper with string instruction
Q1. What is the output of Source block and Destination block for Before block transfer and After
block transfer ?
Q2. What is the difference between Non-overlapped and Overlapped block transfer with string
instruction (explain with block diagrams)
Q3. what are the values in rsi , before block transfer in source block and destination block ?
Q4. How the elements are transfer in Non-overlapped block tranfer with string instruction ?
Q5. Explain BT_NOS procedure .
Q7. Explain disp_block procedure .
Q8. For transfering the elements in destination block , RSI and RDI points to which
Prof. Vishal Wagh
location(address) of source block and destination block?
Q9. What is mean by with string instruction and without string instruction ?
Q10. What is mean by REP , MOVSB , CLI ?
2c : Overlapped Block transper without string instruction
Q1. What is the output of Source block and Destination block for Before block transfer and After
block transfer ?
Q2. What is the difference between Non-overlapped and Overlapped block transfer without string
instruction (explain with block diagrams)
Q3. what are the values in rsi , before block transfer in source block and destination block
Q4. How the elements are transfer in Overlapped block tranfer without string instruction ?
Q5. Explain BT_O procedure .
Q7. Explain disp_block procedure .
Q8. For tranfering the elements in destination block , RSI and RDI points to which location of
source block and destination block ?
Q9. what is mean by with string instruction and without string instruction ?
Q10. What is mean by dstblk-2 ?
Q11. What is mean by srcblk+4, dstblk+2 ?
Q12. Before block transfer destination block starts from which position ?
Q13. How the block is overlapped ?
Q14. Why srcblk+3 and dstblk-2 are same ?
2d : Overlapped Block transper with string instruction
Q1. What is the output of Source block and Destination block for Before block transfer and After
block transfer ?
Q2. What is the difference between Non-overlapped and Overlapped block transfer with string
instruction (explain with block diagrams)
Q3. what are the values in rsi , before block transfer in source block and destination block
Q4. How the elements are transfer in Overlapped block tranfer with string instruction ?
Q5. Explain BT_OS procedure .
Q7. Explain disp_block procedure .
Q8. For tranfering the elements in destination block , RSI and RDI points to which location of
source block and destination block?
Q9. what is mean by with string instruction and without string instruction ?
Q10. What is mean by dstblk-2 ?
Q11. What is mean by srcblk+4, dstblk+2 ?
Q12. Before block transfer destination block starts from which position ?
Q13. How the block is overlapped ?
Q14. Why srcblk+3 and dstblk-2 are same ?
Q15. What is mean by REP, MOVSB and STI ?



Assignment No. 3 (HEX to BCD and BCD to HEX number conversion )
Q1. what is mean by HEX number and BCD number ?
Q2. How to convert HEX number into BCD number ?
Q3. How to convert BCD number into HEX number ?
Q4. what is the formula for BCD to HEX number conversion ?
Q5. Explain stack operation for both the conversions.
Q6. Explain HEX to BCD procedure
Q7. Explain BCD to HEX procedure
Q8. what is mean by sub 30H ?
Q9. Explain accept16 and display16 procedure
Q10. Explain add, sub, mul and div operation.
Q11. What is mean by PUSH and POP operations of Stack ?
Assignment No. 4 (String operations 1. Calculate length
2. Reverse
3. check palindrome)
Q1. How to calculate length of string ?
Q2. How to convert string into reverse string (where RSI and RDI are point to the string) ?
Q3. What is mean by palindrome string ?
Q4. Why we decrement RAX by one for calculating length of string
Q5. How RSI points to the last character of the string ? Why we decrement RSI by one ?
Q6. How to check the string is palindrome ?
Q7. Why we decrement counter by half (explain SHR operation)
Q8. How the comparision is less for checking whether the string is palindrome
Q.9 Explain :
add rsi, rcx
dec rsi (Here why we decrement rsi by one , explain ?)
shr rcx,1
Q10. Explain accept_16 procedure .
Assignment No. 5 (Multiplication Using 1. Successive addition and
2. Shift and add method)
Q1. what is the difference between successive addition and shift and add method ?
Q2. what is mean by ebp in shift and add method ? Explain the Shift and add procedure.
Q3. What is mean by SHL, XOR, DIV, ADD opearion ?



Assignment No. 6 (String manipulations using FAR procedures
1. concatenation of string
2. Find the substring in given string)
Q1. How to call the procedures using switch case ?
Q2. How to concatenate the two different strings ?
Q3. what is mean by CUR_ADDR and END_ADDR, why we used ?
Q4. what is the use of REP MOVSB for string concatenation ?
Q5. why we require str3 and str3_Size ?
Q6. How the END_ADDR points to the end of the string ?
Q7. why we compare CUR_ADDR and END_ADDR ?
Q8. How to store substring count in ss_count ?
Q9. How this instruction works , REPE CMPSB ?
Assignment No. 7
( Different types of Waves generation ..forword, backword, staircase , etc.)
Q1. what are the values of 8255-DAC for different ports (Port A, Port B, Port C and CWR)
Q2. what is mean by 80 H, how it comes ? Draw the control word format for it .
Q3. what is mean by OUT 67H, AL ?
Q4. what is mean by INT3 instruction
Q5. when we increment the AL ?
Q6. explain the logic for all the wave generation (how to display straight verticle line, why we give
delay, why we increment/decrement AL)
Q7. write the delay code and what happens when we give delay ?
Q8. write the code for following waveform
 


[-]
Quick Reply
Message
Type your reply to this message here.

Image Verification
Image Verification
(case insensitive)
Please enter the text within the image on the left in to the text box below. This process is used to prevent automated posts.

[-]
Quick Reply
Message
Type your reply to this message here.

Image Verification
Image Verification
(case insensitive)
Please enter the text within the image on the left in to the text box below. This process is used to prevent automated posts.

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  jntu comprehensive viva questions for ece with answers Guest 1 0 25-03-2017 09:46 AM
Last Post: jaseela123
  past question on nestle siwes aptitude test questions Guest 1 0 25-03-2017 09:23 AM
Last Post: jaseela123
  jsp servlets multiple choice questions with answers Guest 1 0 08-03-2017 10:07 AM
Last Post: jaseela123
  avr microcontroller interview questions and answers pdf Guest 1 0 06-03-2017 12:31 PM
Last Post: jaseela123
  uttara kannada consequences that led to problems of evs assignment Guest 1 0 28-02-2017 04:44 PM
Last Post: jaseela123
  comprehensive viva questions for ece free download balu1559 2 544 20-02-2017 11:36 AM
Last Post: jaseela123
  comprehensive viva questions for ece pdf Guest 3 4,342 20-02-2017 11:36 AM
Last Post: jaseela123
  11th evs journal assignment answers Guest 1 0 13-02-2017 10:59 AM
Last Post: ijasti
  class 12 organic chemistry practical viva questions with answers Guest 2 0 10-02-2017 07:40 PM
Last Post: Guest
  physics viva questions of practicals for class12 Guest 1 0 08-02-2017 10:48 AM
Last Post: jaseela123
This Page May Contain What is Oral Questions on each assignment of MIL And Latest Information/News About Oral Questions on each assignment of MIL,If Not ...Use Search to get more info about Oral Questions on each assignment of MIL Or Ask Here

Options: